The molicel inr21700 p45b is a top-rated, genuine brand battery, renowned for its exceptional performance.
With a robust 4500mAh capacity, it delivers a continuous discharge current of up to 45A, making it ideal for high-lumen LED flashlights and other high-energy devices.
This molicel 21700 p45b stands out with its remarkable low-temperature resistance, maintaining high-current discharge capabilities even in freezing down to -40°C.
Designed for reliability and longevity, it offers stable operation for both professional flashlights and a variety of high-performance electronics.
Whether you're on a bustling work site or gearing up for an adventurous expedition,
the 21700 molicel p45b ensures dependable power at your fingertips, providing the ultimate support when it matters most.
Technical Specifications:
- Brand: Molicel
-
Model: inr21700 p45b
- Capacity: 4500mAh
- Voltage: 3.6V
- Cell Type: Lithium Ion - INR / Lithium Nickel Manganese Oxide / LiMnNiO
- Charge: Yes
- Top Type: Flat Top
- Protection: Anti-explosion valve (can not replace BMS/PCB board)
Please refer to the molicel p45b specification section for other parameters in the specification tab.
Failure to read and follow the lithium-ion safety instructions and warnings may result in fire, personal injury and property damage if the battery is charged and/or used improperly.
**Safety Warning for Lithium-Ion Batteries:**
Before purchasing, ensure you have a comprehensive understanding of lithium-ion batteries. They are sensitive to charging conditions and can lead to explosions, fires, or burns if mishandled. **Precautions include:**
- Charging only on fire-proof surfaces.
- Never leaving batteries unattended while charging.
- Using only smart chargers designed for 21700 battery molicel lithium-ion batteries.
- Avoiding mixing old, new, used, or unused batteries.
**Important:** Unprotected molicel p45b cylindrical lithium-ion batteries should not be used stand-alone, especially with e-cigarettes, vaporizer pens, or other devices, as this is a dangerous misuse posing a serious risk of personal injury or property damage. These batteries are for prototyping with electronic protection circuitry only.
**Risk Acknowledgement:** These high discharge current and high capacity molicel 21700 can cause serious injury if mishandled. Use them at your own risk. The buyer assumes responsibility for any damage or injury resulting from misuse or mishandling. No guarantee of compatibility with any device is provided.
1) Mishandling of a cell can lead to generation of heat, possible explosion or ignition and potential serious injury. Safe handling guidelines include the following:
(1) Do not expose cell to fire or heat.
(2) Do not install the cell backwards.
(3) Do not expose the cell to water or salt water, or allow the cell to get wet.
(4) Do not carry or store the cells together with necklaces, hairpins or other metal objects.
(5) Do not place the cells in microwave ovens, high-pressure containers, or on induction cookware.
(6) Do not connect the positive terminal and the negative terminal of the cell to each other with any metal objects such as chains, coins or wire.
(7) Do not pierce the cell with nails, strike the cell with a hammer, step on the cell, or otherwise subject it to strong impacts or shocks.
2) Do not disassemble or modify the cell. The cell contains safety and protection devices, that if damaged, may cause the cell to generate heat, explode or ignite.
3) Do not place the cell in or near fire, stoves, or other high-temperature locations. Do not place the cell in direct sunshine or use or store the cell inside cars in hot weather. Doing so may cause the cell to generate heat, explode, or ignite. Using the cell in this manner may also result in a loss of performance and a shortened life expectancy.
4) Venting device description Safety Valve: Allowing controlled release of pressure in the event of excessive internal gas build up
CAUTION
1) If the device is to be used by small children, the caregiver should explain the contents of the user’s manual to the children. The caregiver should provide adequate supervision to ensure that the device is being used as explained
in the user’s manual.
2) When the cell is worn out, insulate the terminals with adhesive tape or similar materials before disposal.
3) Immediately discontinue use of the cell if, while using, charging, or storing the cell, the cell emits an unusual smell, feels hot, changes color, changes shape, or appears abnormal in any other way. Contact your sales location or E-One Moli Energy if any of these problems are observed.
4) In the event that the cell leaks and the fluid get into one’s eye, do not rub the eye. Rinse well with water and immediately seek medical care. If left untreated the cell fluid could cause damage to the eye.